HI-991300 Waterproof pH, EC, TDS and Temperature Meter with Advanced Features

€895,95
0
Määrä:
Apple Pay Google Pay Mastercard Visa American Express Klarna Generic
  • TOIMITUS

    Hanna Instruments -mittarit ovat tilaustuotteita. Ne toimitetaan suoraan valmistajalta noin viikossa tilauksen ja maksun vahvistumisesta.

    Tuotetta ei ole Korallifarmin varastossa, joten sen noutaminen myymälästä ei ole mahdollista.

Tilaatko yrityksen puolesta?

Voit tilata tuotteen myös ennakkolaskulla. Pyydä lasku, niin lähetämme sen sinulle. Tuote tilataan valmistajalta, kun lasku on maksettu.

The HI-991300 meter features two operation button and is simple to use. All operations and settings, including calibration buffers and temperature scale selections, are made through these two buttons. It has a waterproof and compact casing rated for IP67 conditions and a large tri-line display. The meter has automatic pH calibration at one or two points and a single conductivity calibration. Other user selectable features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients from 0.0 to 2.4% for better conductivity or TDS solution temperature compensation. The meter is supplied with a multi-parameter probe specifically designed for this meter.

Each meter is supplied complete with:

  • HI-12883 pH/EC/TDS probe with built-in temperature sensor, DIN connector and 1mm cable
  • pH 4.01 & 7.01 buffer sachets
  • HI-70031 1413 µS/cm and HI-70032 1382 ppm 1 sachet of each
  • HI-700601 Electrode cleaning solution (2 sachets)
  • 100ml beaker
  • Alkaline batteries: 1.5V AAA x 3
  • Rugged carrying case
  • Calibration certificate of meter
  • Calibration certificate of probe
  • Instruction manual

Main features:

  • Simultaneous, pH, EC/TDS and temperature measurements on a large three line LCD display
  • Selectable temperature unit
  • pH electrode condition display
  • mV of pH measurement for electrode check
  • Last calibration points pH and EC
  • HI-12883 dedicated pH/EC/TDS/temperature probe
  • Probe quick connect system
  • Battery life indication and low battery detection
  • Auto-off function
  • Keystroke confirmation tone
  • Waterproof casing IP67

About the HI-12883 probe

The HI-12883 multi-parameter probe, incorporates a domed shaped pH bulb rated from 0-13 pH, a single junction Ag/Cl reference electrode with gelled electrolyte and a retractable cloth wick junction, a graphite EC/TDS cell, and a temperature sensor in one convenient, rugged polypropylene body. In addition, to ensure against interference from transient electrical noise to pH, a solid-state pre-amplifier is integrated into the probe. The probe is rated from 0 to 50°C.

 

 

pH Range -2.00 to 16.00 pH*
pH-mV ±825 mV (pH-mV)
EC 0 to 3999µS/cm (displays µS for µS/cm)
TDS 0 to 2000ppm
Temperature Range -5.0 to 105.0°C
pH Resolution 0.01 pH
pH-mV Resolution 1 mV
EC 1µS/cm
TDS 1ppm (mg/L)
Temperature Resolution 0.1°C
pH Accuracy @20°C ±0.02 pH
pH-mV >±1 mV
EC/TDS ±2%F.S.
Temperature Accuracy ±0.5°C
pH Electrode HI-12883 pH/EC/TDS temperature sensor, Quick Connect DIN connector and 1 m (3.3') cable (included); please note: HI-12883 is limited to be used from 0 to 13 pH and from 0 to 50°
TDS Conversion factor Selectable from 0.45 to 1.00 with 0.01 increments
Battery Type / Life 3 x 1.5V AAA / approx. 600 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 154 x 63 x 30 mm
Weight 196 g
Case Protection Rating IP67
Valmistaja: Hanna Instruments
Paino: 0.7 kg