-
TOIMITUS
Hanna Instruments -mittarit ovat tilaustuotteita. Ne toimitetaan suoraan valmistajalta noin viikossa tilauksen ja maksun vahvistumisesta.
Tuotetta ei ole Korallifarmin varastossa, joten sen noutaminen myymälästä ei ole mahdollista.
Hanna Instruments -mittarit ovat tilaustuotteita. Ne toimitetaan suoraan valmistajalta noin viikossa tilauksen ja maksun vahvistumisesta.
Tuotetta ei ole Korallifarmin varastossa, joten sen noutaminen myymälästä ei ole mahdollista.
Tilaatko yrityksen puolesta?
Voit tilata tuotteen myös ennakkolaskulla. Pyydä lasku, niin lähetämme sen sinulle. Tuote tilataan valmistajalta, kun lasku on maksettu.
The HI-99301 is a portable, EC/TDS/temperature meter that measures high range conductivity in mS/cm and TDS in ppt. Both instruments are housed in a case rated for IP67 conditions.
This instrument offers single point, automatic calibration with automatically temperature compensated measurements. The compensation coefficient and EC/TDS conversion factor are user-selectable from 0.45 to 1.00 and temperature coefficient is selectable from 0.0 to 2.4%/°C.
This meter easily fits in the palm of your hand and the bottom probe connection ensures the electrode cable doesn't get in your way. The large, multi-level LCD displays the primary reading, temperature and calibration guides simultaneously. Symbols and messages on the LCD indicate meter status and guides users through operations.
At start-up, the meter shows the remaining battery percentage and when a low battery condition is detected, a battery symbol appears on the LCD to advise the user that only a few hours of working time is left.
The HI-76306 EC/TDS/temperature probe resists clogging and is easy to clean.
Ideal for: Boiler Water & Waste Water
| Range | ||
| EC | 0 to 20.00 mS/cm (displays mS) | |
| TDS | 0.00 to 10.00ppt | |
| Temp | -5.0 to 105.0°C | |
| Resolution | ||
| EC | 0.01 mS/cm | |
| TDS | 0.01 ppt (g/L) | |
| Temp | 0.1°C | |
| Accuracy @ 20°C | ±2% F.S. (EC/TDS); ±0.5°C temp | |
| Temperature Compensation | Automatic, with β selectable from 0.0 to 2.4%/°C with 0.1 increments | |
| EC/TDS Calibration | Automatic, one-point at 12.88mS/cm or 6.44 ppt (CONV=0.5) or 9.02 ppt (CONV=0.7) | |
| TDS Conversion factor | Selectable from 0.45 to 1.00 with 0.01 increments | |
| Probe (included) | HI-763063 EC/TDS/Temperature sensor, DIN connector and 1m cable | |
| Battery type/life | 1.5V AAA x 3 approx 500 hours of continuous use | |
| Auto off | User selectable after 8 mins, 60 mins or disabled | |
| Environment | 0 to 50°C RH max 100% | |
| Meter Dimensions | 154 x 63 x 30mm | |
| Weight (with batteries) | 196g | |
| Casing ingress protection rating | IP67 |
| Valmistaja: | Hanna Instruments |
|---|---|
| Tuotekoodi: | HI-99301 |
| Paino: | 0.2 kg |