HI-7014 Pool Line Free Chlorine Checker HC

Ei arvioita
€82,95
0
Määrä:
Tuotekoodi:
HI-7014
Apple Pay Google Pay Mastercard Visa American Express Klarna Generic

  • TOIMITUS JA NOUTO

    Varastotuotteet lähetetään yleensä yhden arkipäivän kuluessa.

    Kuljetus kestää tavallisesti 1–3 arkipäivää.

    Tilaustuotteiden arvioitu toimitusaika on noin 1–2 viikkoa. Jos tilauksessa on sekä varasto- että tilaustuotteita, koko tilaus lähetetään, kun kaikki tuotteet ovat saatavilla.

    Tuotteet voi myös noutaa Korallifarmin myymälästä.

HI-7014 Pool Line Free Chlorine Checker Handheld Colorimeter suitable for use in swimming pools, hot tubs and spas.

The presence of free chlorine, in combination with a correct pH value, ensures that bathing water is clear and disinfected. The concentration of free chlorine in swimming water should be measured regularly. The HI-7014 bridges the gap between simple chemical testing kits and professional instruments. This checker uses an EPA approved DPD method.

  • Specifically for free chlorine
  • More accurate than chemical testing kits
  • Large LCD
  • Small size, great convenience
  • One-button operation
  • Operates on 1 single AAA battery

Four easy steps to testing

Step one – Add a sample to the included cuvette

Step two – Insert sample into the Checker HC and press the button to zero

Step three – Remove sample and add reagent as stated in the manual

Step four – Reinsert sample and press the button to measure your results

 

Range 0.00 to 2.50 ppm (mg/L)
Resolution 0.01 ppm (mg/L)
Precision 3% of reading ±0.03 ppm (mg/L) @ 25°C
Light Source LED @ 525 nm
Light Detector Silicon photocell
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type (1) 1.5V AAA
Auto-off After 2 minutes of non-use and after read
Dimensions 81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)
Weight 64 g (2.25 oz.)
Method Adaptation of USEPA method 330.5. The reaction between free chlorine and the DPD reagent will cause a pint tint in the sample.
Ordering information: Supplied with sample cuvettes and caps, reagent starter kit (6 tests), battery and instructions
Reagent set HI-7014-25 (25 tests)
Calibration set HI-7014-11
PLEASE NOTE: In some cases, samples may contain other parameters which may interfere with results
Interference may be caused by: Bromine, Iodine, Ozone, Oxidized forms of Chromium and Manganese. In case of water with hardness greater than 500 mg/L CaCO3, shake the sample for approximately 2 minutes after adding the powder reagent.
  • If the water used for this procedure has an alkalinity value greater than 250 mg/L CaCO3 or acidity value greater than 150 mg/L CaCO3, the colour of the sample may develop only partially, or may rapidly fade. To resolve this, neutralise the sample with diluted HCl or NaOH.
Valmistaja: Hanna Instruments
Tuotekoodi: HI-7014
Paino: 0.1 kg

Liittyvät tuotteet