pH is the measure of the hydrogen ion concentration (H+). The pH scale goes from 0 (very acidic) to 14 (basic) with pH 7 being neutral. Soil can be acid, neutral or alkaline.
Most plants prefer a pH range from 5.5 to 7.5; but some species prefer more acid or alkaline soils. Nevertheless, every plant has a target for optimum growth.
pH strongly influences the availability of nutrients and the presence of micro-organisms and plants in the soil.
For example, fungi prefer acidic conditions whereas most bacteria, especially those supplying nutrients to the plants, have a preference for moderately acidic or slightly alkaline soils. In fact, in strongly acidic conditions, nitrogen fixing and the mineralisation of vegetable residual is reduced. Plants absorb the nutrients dissolved in the soil water and the nutrient solubility depends largely on the pH value. Hence, the availability of elements is different at varying pH levels.
Each plant needs elements in different qualities and this is the reason why each plant requires a particular range of pH to optimise its growth.
For example, iron, copper and manganese are not soluble in an alkaline environment. This means that plants needs these elements should theoretically be in an acidic type of soil. Nitrogen, phosphorus, potassium and sulphur, on the other hand, are readily available in a pH range close to neutrality.
Abnormal pH values may increase the concentration of toxic elements for plants. For example, a plant may not tolerate an excess of aluminium ions that may increase under acidic conditions. When pH values are too far from neutral conditions a less permeable and more compact soil may result.
Different naturally occurring minerals may affect soil pH in the same way.
HI-12923 has a conical rugged tip. It has a built-in temperature probe for temperature compensated pH readings and an integrated pre-amplifier to provide measurements impervious to noise and electrical interferences.
The HI-721319 auger for ground penetration is supplied to loosen the soil prior to any measurements being taken. The use of the auger is recommended to prevent scratching to the pH glass.
For best results, it is recommended that soil tests be carried out using a prepared soil slurry using the HI-7051 soil sample preparation solution, rather than direct ‘in the field’ measurements - although this is possible following the instructions and use of the included auger.
Orchard plants, vegetables and herbaceous cultivations
Preferred pH Range
Garden plants, flowers & house plants
| pH Range | -2.00 to 16.00 pH | |
| Temperature Range | -5.0 to 105.0°C / 23.0 to 221.0°F | |
| pH Resolution | 0.01 pH | |
| Temperature Resolution | 0.1°C / 0.1°F | |
| pH Accuracy | ±0.02 pH | |
| Temperature Accuracy | ±0.5°C (up to 60°C), ±1°C (outside); ±1.0°F (up to 140°F), ±2°F (outside) |
|
| pH Calibration | automatic, 1 or 2 point with 2 sets of memorised buffer values (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18) |
|
| Temperature Compensation | Automatic, -5 to 105°C (23 to 221°F) | |
| pH Electrode | HI 12923 preamplified pH and temperature probe with conical tip, DIN connector and 1 m (3.3') cable (included) - The HI-12923 is limited to be used from 0 to 12 pH and from -5 to 70°C |
|
| Battery Type / Life | 3 x 1.5V AAA / approx. 1400 hours of continuous use: auto-off after 8 minutes of non-use |
|
| Environment | 0 to 50°C (32 to 122°F); RH max 100% | |
| Dimensions | 154 x 63 x 30 mm (5.9 x 3.1 x 1.4") | |
| Weight | 196g | |
| Case ingress protection rating | IP67 |
| Vendor: | Hanna Instruments |
|---|---|
| SKU: | HI-99121 |
| Weight: | 0.7 kg |